Learners read an explanation of how to connect two 7485 ICs to compare binary numbers by creating an 8-bit comparator. Diagrams and charts are presented.

The explanation and use of timing diagrams used in digital electronics to graphically show the operation of various circuits are given.

This project gives a drawing with steps to complete the activity.

2D and 3D views used to help convey information from a drafter or designer to the welder are provided. This activity will focus on a mounting wedge. A short quiz to test your ability to correctly read this information follows.

In this simulation activity, an electrician will troubleshoot an AC motor that is overheating. Before accessing blueprints and then using a multimeter to find the fault, the learner will follow safety protocols by following lock-out tag-out procedures and then suit up with appropriate (PPE) personal protection equipment.

In this simulation activity, an electrician troubleshoots a defective compressor motor that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

In this simulation activity, an electrician troubleshoots a defective water pump that will not start. To find the problem, the learner selects the appropriate blueprints that must be referred to while performing the troubleshooting steps. Then safety protocols will be followed, such as making lockout-tag out installations and donning PPE items before taking measurements with a multimeter to locate the faulty component.

Learners distinguish between competencies that are effective and robust, and those that are ineffective and weak. The learning object is designed for faculty who are writing or revising courses. It contains audio.

In this interactive object, learners read the common abbreviations used in engineering drawings and then test their knowledge in three short exercises.

Design cycle crossword

This game will review primary, secondary, warm and cool color schemes.

It's a game about chapter 5 in art appreciation.

مسابقة2