The learner will identify angles and cutting methods.
Carbide Turning Tool Geometry Set 2
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
What is the correct hand style of the tool shown?
Your Answer
Correct Answer
Right
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
The greater the included angle of the insert, the stronger the cutting edge.
Correct Answer
T
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
The greater the included angle of the insert, the stronger the cutting edge.
Your Answer
Correct Answer
T
Question 1 of 10
Carbide Turning Tool Geometry Set 2
What is the shape of the insert with the greatest amount of cutting edges?
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
What is the shape of the insert with the greatest amount of cutting edges?
Correct Answer
Round
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
What is the shape of the insert with the greatest amount of cutting edges?
Your Answer
Correct Answer
Round
Question 1 of 10
Carbide Turning Tool Geometry Set 2
The size of an insert is based on:
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
The size of an insert is based on:
Correct Answer
The inscribed circle of the insert
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
The size of an insert is based on:
Your Answer
Correct Answer
The inscribed circle of the insert
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
Correct Answer
Provide additional strength
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
Your Answer
Correct Answer
Provide additional strength
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
Correct Answer
Nose radius
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
Your Answer
Correct Answer
Nose radius
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Irregular ribbon-shaped chips, like those shown here, are usually caused by:
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
Irregular ribbon-shaped chips, like those shown here, are usually caused by:
Correct Answer
Too low of a feed rate
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
Irregular ribbon-shaped chips, like those shown here, are usually caused by:
Your Answer
Correct Answer
Too low of a feed rate
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Crumbling chips, like those shown here, are usually caused by:
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
Crumbling chips, like those shown here, are usually caused by:
Correct Answer
Too high of a feed rate
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
Crumbling chips, like those shown here, are usually caused by:
Your Answer
Correct Answer
Too high of a feed rate
Question 1 of 10
Carbide Turning Tool Geometry Set 2
In the ANSI insert identification system, the insert in the illustration would have a _______ designating its shape.
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
In the ANSI insert identification system, the insert in the illustration would have a _______ designating its shape.
Correct Answer
“C”
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
In the ANSI insert identification system, the insert in the illustration would have a _______ designating its shape.
Your Answer
Correct Answer
“C”
Question 1 of 10
Carbide Turning Tool Geometry Set 2
In the ANSI insert identification system, the insert in the illustration would have a _____ designating its shape.
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Correct!
In the ANSI insert identification system, the insert in the illustration would have a _____ designating its shape.
Correct Answer
“V”
Question 1 of 10
Carbide Turning Tool Geometry Set 2
Incorrect
In the ANSI insert identification system, the insert in the illustration would have a _____ designating its shape.
Your Answer
Correct Answer
“V”
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
Question 1 of 10
No Comments Yet
Carbide Turning Tool Geometry Set 2 by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.