The learner will define saw blade terminology.
Saw Blades
What material is not used for manufacturing saw blades?
Question 1 of 10
Saw Blades
Correct!
What material is not used for manufacturing saw blades?
Correct Answer
Aluminum
Question 1 of 10
Saw Blades
Incorrect
What material is not used for manufacturing saw blades?
Your Answer
Correct Answer
Aluminum
Question 1 of 10
Saw Blades
When using a band saw, cutting speeds are expressed by___________.
Question 1 of 10
Saw Blades
Correct!
When using a band saw, cutting speeds are expressed by___________.
Correct Answer
feet per minute
Question 1 of 10
Saw Blades
Incorrect
When using a band saw, cutting speeds are expressed by___________.
Your Answer
Correct Answer
feet per minute
Question 1 of 10
Saw Blades
The kerf of a saw blade is __________.
Question 1 of 10
Saw Blades
Correct!
The kerf of a saw blade is __________.
Correct Answer
the width of the cut produced by the blade
Question 1 of 10
Saw Blades
Incorrect
The kerf of a saw blade is __________.
Your Answer
Correct Answer
the width of the cut produced by the blade
Question 1 of 10
Saw Blades
Which statment is true when talking about the gage of a blade?
Question 1 of 10
Saw Blades
Correct!
Which statment is true when talking about the gage of a blade?
Correct Answer
All of the above
Question 1 of 10
Saw Blades
Incorrect
Which statment is true when talking about the gage of a blade?
Your Answer
Correct Answer
All of the above
Question 1 of 10
Saw Blades
The pitch of a saw blade is ____________.
Question 1 of 10
Saw Blades
Correct!
The pitch of a saw blade is ____________.
Correct Answer
the number of teeth per inch on a given blade
Question 1 of 10
Saw Blades
Incorrect
The pitch of a saw blade is ____________.
Your Answer
Correct Answer
the number of teeth per inch on a given blade
Question 1 of 10
Saw Blades
Which term would not be considered a rake angle?
Question 1 of 10
Saw Blades
Correct!
Which term would not be considered a rake angle?
Correct Answer
Double rake angle
Question 1 of 10
Saw Blades
Incorrect
Which term would not be considered a rake angle?
Your Answer
Correct Answer
Double rake angle
Question 1 of 10
Saw Blades
Which statment is true concerning a blade set?
-
The set dimension is the distance from the edge of the tooth to the centerline of the blade.
-
The set of a saw blade is the offset of the teeth to provide clearance. There must be a set on at least one side of the blade.
-
The set is equal on both sides of the blade to provide clearance for the back of the blade.
Question 1 of 10
Saw Blades
Correct!
Which statment is true concerning a blade set?
Correct Answer
The set is equal on both sides of the blade to provide clearance for the back of the blade.
Question 1 of 10
Saw Blades
Incorrect
Which statment is true concerning a blade set?
Your Answer
Correct Answer
The set is equal on both sides of the blade to provide clearance for the back of the blade.
Question 1 of 10
Saw Blades
The definition of blade width is ___________.
Question 1 of 10
Saw Blades
Correct!
The definition of blade width is ___________.
Correct Answer
the distance from the tip of the tooth to the back of the blade
Question 1 of 10
Saw Blades
Incorrect
The definition of blade width is ___________.
Your Answer
Correct Answer
the distance from the tip of the tooth to the back of the blade
Question 1 of 10
Saw Blades
The general rule of thumb when selecting a saw blade for a specific job is _________.
Question 1 of 10
Saw Blades
Correct!
The general rule of thumb when selecting a saw blade for a specific job is _________.
Correct Answer
always have three teeth engaged in the workpiece
Question 1 of 10
Saw Blades
Incorrect
The general rule of thumb when selecting a saw blade for a specific job is _________.
Your Answer
Correct Answer
always have three teeth engaged in the workpiece
Question 1 of 10
Saw Blades
A ________ set is useful when the cross-sectional shape of the workpiece varies.
Question 1 of 10
Saw Blades
Correct!
A ________ set is useful when the cross-sectional shape of the workpiece varies.
Correct Answer
wave
Question 1 of 10
Saw Blades
Incorrect
A ________ set is useful when the cross-sectional shape of the workpiece varies.
Your Answer
Correct Answer
wave
Question 1 of 10
Score
You have answered 5 of 10 questions correctly.
50%
See other flashcards and apps related to:
Question 1 of 10
- Author
- Published
- 12/8/2014
- Last Updated
- 12/8/2014
No Comments Yet
Saw Blades by Fox Valley Technical College is licensed under a Creative Commons Attribution 3.0 Unported License.