Determining Punch & Dies for Press Brake Forming
By Dave Hoffman
Introduction to selecting the proper punch and die for air bending or bottoming when forming on a press brake. Includes charts and methods for selection.
Normally Open vs. Normally Closed Pressure Control Valves
By Terry Bartelt
In this animated activity, learners examine the operation of normally open and normally closed valves used in hydraulics. A brief quiz completes the learning object.
Unloading Valves (Screencast)
By Terry Bartelt, Stephen Schneider
In this screencast, learners examine the internal structure of an unloading valve. This learning object includes a video clip demonstrating the use of an unloading valve in a metal stamping application.
Current Divider Rule (CDR)
By Patrick Hoppe
Students review the Current Divider Rule (CDR) and work practice problems.
Parallel Circuit Analysis Practice Problems: Circuit #5
In this interactive object, learners solve for total resistance and current, the current through each resistor, the voltage across each resistor, and the power dissipated by each resistor.
AC Voltage Conversion Problems
By John Rosz, Terry Bartelt
Learners work problems to make conversions between RMS, average, peak, and peak-to-peak AC voltages.
Automotive Electrical Systems: Ohm's LawPractice Problems #2
By Andrew Rinke, Patrick Hoppe
Learners review Ohm's Law and then work 12 problems to help them apply the law to automotive electrical systems. In each of the problems, students are given two of the three variables (voltage, resistance, or current) and are asked to solve for the third.
Series-Parallel Resistance -- Practice Problems
In this learning activity you'll practice solving for the total resistance of series-parallel DC circuits.
The Electrostatic Charge of a Capacitor
In this animated activity, learners examine the conversion of electrical energy into an electrostatic charge within the dielectric material of a capacitor.
Continuous Cycling Tuning Example
By Craig Hemken, Terry Bartelt
In this interactive object, learners follow the steps required for the Ziegler-Nichols Continuous Cycling method. The process identification procedure is performed, calculations are made, and the proper PID values are programmed into the controller.
Counterbalance Valves
Learners view an animation of a counterbalance valve in operation and examine the valve’s internal structure.
Setting Up a Wire Feeder for GMAW
In this animated and interactive object, learners follow steps that begin with choosing the correct drive roll and include feeding the electrode wire from the spool to the welding gun.
Sizing Motor Overloads
By Terry Bartelt, Pat Jensen
Learners use the National Electrical Code to determine the size of a motor overload protection device.
Visual Logic Basic Programming: Using Flow Charts
By Jason Vosters
In this learning activity you'll understand what flow charts are and how they're used to create computer programs.
The Welder's Tool Bag
By Jessie Lloyd
In this learning object, you’ll explore what tools should be a part of every welding tool bag.
Multiplexers
In this animated object, learners examine the operation of a multiplexer and the function of the data input and selector lines. A brief quiz completes the activity.
The MOD Number
Learners read how to calculate the MOD number and how it is used.
The 4-Input Truth Table
In this learning activity you'll practice using the 4-input truth table.
Phase Relationships Between Line-Neutral and Line-Line Voltages
By Michael Gradinjan, Terry Fleischman
Learners view a demonstration showing that line-neutral voltages and line-line voltages are not in-phase with each other, but have a definite 30-degree relationship.
Using Gage Blocks: Discussion and Quiz
By Barbara Anderegg
In this learning activity you'll identify the consequences of using gage blocks incorrectly.
The Thevenin Theorem
This animated object allows students to examine the four steps used to reduce a complex circuit to a simple series circuit.
The Relay
In this animated lesson, students view the operation of an electromechanical relay. A brief quiz concludes the activity.
Multi-Rung Control in a Ladder Circuit
Learners study the operation of a ladder circuit in which coils on one rung control contacts in other rungs.
An Algorithm for Converting a Decimal Number to a Hexadecimal Number
By Kevin Ritzman
In this animated activity, learners examine a systematic method for converting a decimal number (base 10) into a hexadecimal number (base 16).
An Algorithm for Converting a Hexadecimal Number to a Decimal Number
In this animated and interactive object, learners follow two methods for converting a hexadecimal number to a decimal number. They test their knowledge in exercises at the end of the learning object.