Lathe Project: Setting Speeds & Feeds
By Kelly Curran
This project gives a drawing with steps to complete the activity.
Sine Wave Fundamentals: Practice Problem #8
By Patrick Hoppe
In this interactive object, learners determine the Vp, Vp-p, Vrms, Vavg, and the frequency of a sine wave that is displayed on an oscilloscope screen.
Project Sheet - Sawing 2
This project gives a drawing and steps to complete the activity.
Project Sheet: Angle Plate Part 2
Project Sheet: Operation of Controls on a Radial Drill
Depth Measurement
In this learning activity you'll review a visual overview of depth measurement using the depth micrometer.
Cutting Fluids - Coolant Inspection Project
This project sheet outlines the steps for coolant inspection and charging.
Project Sheet - Pedestal Grinder Maintenance
This is a project that gives a drawing with steps to complete the activity.
The Counter-Reset Function
By Terry Bartelt
Learners examine the counter-reset function of a programmable controller and how it is used.
Basic Types of Lines Used in Engineering Drawings
By Kelly Curran, Glenn Sokolowski
In this highly interactive object, learners associate basic line types and terms with engineering drawing geometry. A quiz completes the activity.
Lathes - Speed & Feed Setting
This document is a visual and text description of lathe speed and feed settings.
Indirect Measurement
In this learning activity you'll review a visual overview of indirect measurement.
Concepts of Programming 9: Pseudocode Repetition Structures using While Statements
By Jason Vosters
Explore repetition structures, which are commonly referred to as “Looping” statements, are a vital component of programming computer and industrial applications.
Lathe Project: Installing and Removing Work-holding Devices
This project gives steps to complete the activity.
Lathe Project: Turning Using Steel Spring Collets
By Thaddeus Hetzer
This learning object contains work instructions and a drawing for turning using steel spring collets on a lathe.
Project Sheet - Sterling Drill Grinding Machine
Project Sheet: Angle Plate Part 1
Preparing Thread Cutting Tools
This document is a visual and text description of preparing thread cutting tools, primarily used on a lathe.
Material Condition Modifiers
By Janet Braun
Material condition modifiers may be applied to tolerances for geometric characteristics of features of size. A feature of size is one that can be measured across two opposing points, either internally or externally.
Project Sheet: Radial Drilling Angle Plate Part 2a
Sine Wave Fundamentals: Practice Problem #6
DC/AC I: Unit 3 Sample Exam
In this interactive object, students answer 10 questions covering Ohm's Law and Power Law.
Lathe Project: Crank Handle Body
Project Sheet: Radial Drilling Angle Plate 1
Transistor DC Analysis Practice Problems: Circuit #4
Learners analyze an emitter-biased npn transistor circuit. A "help" screen is available.