Ultrasonic Flowmeters (Screencast)
By John Casey, Terry Bartelt
In this animated learning object, learners examine how an ultrasonic flowmeter measures the flow of liquids through a pipe using ultrasonic sound waves. A short quiz completes the activity.
Hydraulic Pressure Switch Applications
By Terry Bartelt
This animated lesson demonstrates hydraulic pressure switch applications when the switch is connected to a ladder circuit to operate in a hydraulic system.
Acceleration and Deceleration Adjustments
In this animated activity, learners examine the circuitry in a DC variable speed drive that causes the motor to accelerate or decelerate at slow rates. This learning object has audio content.
Sequence Valves
By Terry Bartelt, Stephen Schneider
Learners view an animation of a sequence valve in operation and examine the valve’s internal structure.
PLC Sourcing Input Modules
In this interactive and animated object, learners study how to wire field devices to a PLC sourcing input module. A brief quiz completes the activity.
Thermal Flowmeters
In this animated object, learners examine the operation of a thermal flowmeter used in process control applications. A brief quiz completes the activity.
Motor Protection
By Terry Bartelt, Pat Jensen
Learners examine devices that are used to protect a motor from damage, such as fuses, overload heaters, and thermal protectors. A quiz completes the activity.
Inductive Proximity Sensor Target Considerations
Learners consider the factors that determine how well an inductive proximity sensor can detect an object. Those factors are size, position, and the material from which the target is made. A brief quiz completes the activity.
The Firing Circuit of a DC Drive
In this animated activity, learners examine the firing circuits in a DC variable speed drive. The circuits cause the current flow through the armature and rpm to vary. This activity has audio content.
Phase-Splitting of Single-Phase Motors
By Terry Bartelt, Terry Fleischman
The learner will understand the two methods used to create a phase shift in current between two windings.
PLC Counter Instructions
In this animated object, learners examine the operation of up-counters and down-counters for a programmable controller. A brief quiz completes the activity.
Pneumatic FRL Units
Learners examine a Filter-Regulator-Lubricator (FRL) unit that is used to prepare the air in a pneumatic system.
The Transmission of Force in a Hydraulic System
In this animated object, students view a depiction of how force is transmitted by hydraulic cylinders and confined fluid.
The Work Performed in a Hydraulic System
In this interactive object, learners examine how work is performed in foot-pounds by a hydraulic system that uses a pump and cylinder. A brief quiz completes the activity.
Motor Control: Hands-on Testing and Troubleshooting Procedures for the Motor Control Lab
By Dick Dierks
Learners follow a step-by-step explanation of how to test fuses and circuit interrupting devices.
Concepts of Programming 8: Pseudocode Repetition Structures using For Statement
By Jason Vosters
Explore repetition structures, which are commonly referred to as “Looping” statements, are a vital component of programming computer and industrial applications.
Hall-Effect Sensors
In this animated object, learners examine how a Hall-effect sensor operates. A short quiz completes the activity.
Displacement Level Sensors
In this animated object, learners study how displacement level sensors are used to measure the level of liquid in a tank.
Voltage Regulation
In this animated activity, learners examine how the speed of a motor may change if the voltage from the power source fluctuates due to power line irregularities. This lesson has audio content.
Hydrocarbon Gas Sensor
Learners study how a hydrocarbon gas sensor operates and why it is used. A short quiz completes the activity.
Sensor Wiring Configurations
In this animated object, learners examine how two- three- and four-wire sourcing and sinking sensors operate. A brief quiz completes the activity.
Temperature Emissivity of Non-Blackbodies (Screencast)
Learners study the effect of reflected and transmitted energy on the measurement of emitted energy by a non-blackbody. A short quiz completes the activity.
Standard Calibration Procedure
Learners follow steps to calibrate a transmitter used in process control applications. A brief quiz completes the activity.
Excess Gain of Optical Sensors
In this animated activity, learners examine how to change the gain of an optical sensor to overcome environmental conditions and distance.
Retro-Reflective Optical Sensors
Learners study the operation of the retro-reflective optical sensor, along with the guidelines that should be followed regarding the target size, reflector size, alignment, and the reflectivity of the target.