Lathe Project: Straight Turning Between Centers
By Kelly Curran
This project gives a drawing with steps to complete the activity.
Lathe Project: Turning Between Centers
By Thaddeus Hetzer
Learners read work instructions and view a drawing for turning between centers on a lathe.
Project Sheet - Drill & Tap Gage
This lesson provides a drawing with steps to complete the activity.
Project Sheet - Indicator Rod
Operating the Adira Hydraulic Shear
By Dave Hoffman
In this interactive object, learners set up a shear, enter the back gauge dimension, and prepare to shear metal in a simulation of the Adira Hydraulic Shear.
General Safety - Ears and Face
In this learning activity you'll review the safety equipment used to protect a worker's face and ears.
Press Brake - Hydraulic
Identifies the parts of the hydraulic press brake featuring the Adira up-acting press brake. Interactive section asks to identify parts after first learning them.
Sleep Deprivation
By Rosie Bunnow
Learners test their knowledge of how sleep deprivation affects work productivity.
Lathe Project: Facing and Center Drilling
The learner reads step-by-step work instructions and views a drawing for facing and center drilling on a lathe.
Residential Water Sizing Project -2
By Randy Lorge
This object will allow the viewer to practice the necessary skills involved with sizing the water distribution system of a 1 family residence.
Lathe - Cutting Tool Shapes
This document is a visual and text description of lathe cutting tool shapes.
Feed Rate Calculations
This content gives the student a text and photo overview of feed rate calculations.
Problem Solving - Describing the Problem
By Mitch Vesaas
The learner will understand how to measure a problem over time by using a common run chart to visualize the gap between past performance and future goals.
Saw - Marvel - PCII - Programming a Job (Full CNC)
The student views step-by-step instructions for programming a "job" with the PCII on the Marvel vertical band saw.
Spark Testing of Materials
The learner sees photos of the spark patterns of various materials and their related properties.
Lockout / Tagout
In this learning activity you'll review the information and images on lockout and tagout procedures.
Cutting Speeds & RPM Calculations
In this document you'll review an overview of cutting speeds and RPM calculations.
Lathe Project: Tapers with a Taper Attachment - Gear Spindle
Lathe Project: Turning with a Follower Rest
Programming Hurco Controller – Manual Mode
In this learning activity you'll review an explanation of how to operate the Hurco Controller in the manual mode.
Surface Finish
By Barbara Anderegg
Learners review surface finish basics and read how to calculate the roughness average.
Lathes: Screw Thread Micrometer
This document is a visual and text description of using a screw thread micrometer with a lathe.
General Shop Safety - Rigging & Lifting
In this learning activity you'll review rigging and lifting as well as signals for crane movement.
Maintenance Roles in Effective Teams
Learners identify maintenance roles and match statements characteristic of each role. This activity has audio content.
Lathe Project: Process Planning - Tap Handle 2 (Casting Setup)
This project gives steps to complete the activity.