Which type of metal transfer is limited to use on thin stainless steel?
___________ is not suitable for all position welding on stainless steel.
Spray transfer welding requires _____________ shielding.
Electrode orientation affects bead shape and penetration to a greater extent than arc voltage or ________________.
Spray transfer requires the use of direct current, a positive electrode (DCEP), and a current level above a critical value called the ____________ current.
Because the spray transfer drops are smaller than the arc length, _________________ don't occur and spatter is negligible, if not totally eliminated.
When all other variables are held constant, increasing welding current (wire feed speed) results in all except ______________.
The current and polarity selection for GMAW is ______________.
With all variables held constant, arc voltage is directly related to ______________.
A voltage increase tends to _____________ the weld bead and increase the width of the fusion zone.
Excessively high voltage may cause all except _____________.
At _____________ travel speeds, the welding arc impinges on the molten weld pool, which reduces the effective penetration.
For welding aluminum, which mode of metal transfer is preferred, even in all positions?
For some materials, such as aluminum, a ___________ technique is preferred.
A prolonged temperature of 800 to 1600 degrees fahrenheit when welding stainless steel can cause ________________.