High Voltage Street Lighting
|
See more in Electronics
Test you knowledge of High Voltage Street lighting
Topics of this game:
- High voltage Street lighting cabinet are supplied with what voltage for W.A.
- Ground Strap in used for fusing a High voltage Circuit
- The primary strap location is used to check for grounds.
- our high voltage street lighting cable____
- megger readings can be made at what location/s
- When megger readings are taken at the top and bottom of the ground strap location a ...
- to safely de-energies a high voltage circuit you have to..
- First step when working a high volt Circuit
- megger readings from concentric to lead test for
- when megging from lead to lead what can be indicated
- a high voltage circuit must have a ground in the circuit to run entirely
- when megging from concentric to lead a 0.0 reading indicates
- our system needs to have a concentric neutral run with the lead to run the lights
- An oil switch can not be operated with low voltage (120v)
- an oil switch is disabled by pulling the primary
- a high voltage series circuit can be "forced on"
- high voltage street lighting can run 20 or 150 luminaries as long as the current is
- use your glove only when working any/all oil swiches, primary straps, and ground straps at night
- after fixing a circuit put everything back together and see if Person on Watch gets a call tonight
- High voltage substations can be left unlocked if your working a circuit in that sub.
